ACS - Exam-Example an der TU München

Karteikarten und Zusammenfassungen für ACS - Exam-Example an der TU München

Arrow Arrow

Komplett kostenfrei

studysmarter schule studium
d

4.5 /5

studysmarter schule studium
d

4.8 /5

studysmarter schule studium
d

4.5 /5

studysmarter schule studium
d

4.8 /5

Lerne jetzt mit Karteikarten und Zusammenfassungen für den Kurs ACS - Exam-Example an der TU München.

Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 1 (Communication) (appr. 8%)


b) Describe the „physical layer“ of the OSI layer model.


Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 1 (Communication) (appr. 8%)


c) Describe the „data-link layer“ of the OSI layer model.

Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 3 (LIN) (appr. 9%)


b) Which errors can be distinguished on the LIN Bus.


Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 3 (LIN) (appr. 9%)


b) Together with the LIN Bus system a workflow has been defined. Which description files are

essential for this workflow, describe the content.


Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 4 (CAN) (appr. 14%)


a) Which media access control method is used in the CAN Bus ?




Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 4 (CAN) (appr. 14%)


b) When do you see a remote frame on the CAN Bus?


Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:


Assignment 4 (CAN) (appr. 14%)


e) Which error detection checks are carried on the CAN Bus?


     1) On Frames



      2) On Bit level



Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 5 (Flexray) (appr. 15%)


a) Describe the following term in relation to time synchronization.


1) Offset correction



2) Drift Correction




Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 5 (Flexray) (appr. 15%)


c) Describe the characteristics of the Flexray Bus system.

Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 6 (MOST) (appr. 16%)


a) Which topology is used in the MOST Bus System?


Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 6 (MOST) (appr. 16%)


c) Which error handling is realized in the synchronous Channel of the MOST bus system ?


Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

Assignment 8 (TCP/IP) (appr. 12%)


e) Ethernet is not suitable for transmitting safety critical data. Which properties are not fulfilled in Ethernet that are required for the transmission of safety critical data ?


Kommilitonen im Kurs ACS - Exam-Example an der TU München. erstellen und teilen Zusammenfassungen, Karteikarten, Lernpläne und andere Lernmaterialien mit der intelligenten StudySmarter Lernapp. Jetzt mitmachen!

Jetzt mitmachen!

Flashcard Flashcard

Beispielhafte Karteikarten für ACS - Exam-Example an der TU München auf StudySmarter:

ACS - Exam-Example

Assignment 1 (Communication) (appr. 8%)


b) Describe the „physical layer“ of the OSI layer model.


Signals over the physical cable to Databits. In that way the information over the transport medium is prepared for the upper layer (Data Link Layer). In most of the cases a transceiver is used to achieved that.


The OSI Layers:

<put the photo>



ACS - Exam-Example

Assignment 1 (Communication) (appr. 8%)


c) Describe the „data-link layer“ of the OSI layer model.

Data bits to frames. The bits comming from the under layer (Transport layer) are organized in frames, so they can passed to the upper layer (Network layer).


Here, it's needed the physical address of the devices where the medium access control takes place.


The OSI Layers:

<put the photo>

ACS - Exam-Example

Assignment 3 (LIN) (appr. 9%)


b) Which errors can be distinguished on the LIN Bus.


A LIN-Node ca detect six different type of errors:


1) Bit Errors

2) Checksum

3) Identifier-Parity

4) Slave-Not-Responding

5) Inconsistent-Synchronization-Field

6) Physical-Bus


There is not a specified error management.


______________________________


1) Bit Errors (it would be collisions on the bus) - can only be detected by the sender.


2) Checksum (Result of EMI) (Either the data or the checksum have been corrupted)


3) Identifier-Parity (When a identifier from the Master have been corrupted, so a slave could not respond)


4) Slave-Not-Responding 


5) Inconsistent-Synchronization-Field (slave is unable to sznchronized)


6) Physical-Bus



ACS - Exam-Example

Assignment 3 (LIN) (appr. 9%)


b) Together with the LIN Bus system a workflow has been defined. Which description files are

essential for this workflow, describe the content.


  • LDF - LIN Description File: The complet characteristics of the LIN Cluster are defined, including the communication. 


  • NCF -Node Capability File: Describes the functional characteristic of a LIN slave. i.e. The frame and signal definition, and the diagnostic functions.


___________________________


NCF - (of one specific slave) (those can offered after as a "Off the Shell" Slaves and those NCF-Files can be read into the System Defining Tool).


LDF - at the output of the System Defining Tool. By using the LDF, the software components for the LIN communication can be generated automatically. Additionally is used to generate the parameters for the analysis tools.


ACS - Exam-Example

Assignment 4 (CAN) (appr. 14%)


a) Which media access control method is used in the CAN Bus ?




CSMA/CA - Carrier Sense Multiple Access / Collision Avoidance


____________________


Through this method the arbitration is done, while the data is transmitted by observing the actual bit on the bus and the bit being transmitted, at that point the respective node losing priority will stop transmission.


ACS - Exam-Example

Assignment 4 (CAN) (appr. 14%)


b) When do you see a remote frame on the CAN Bus?


When a node (ECU) needs certain information (message/an specific identifier) from another ECU, it asks for it through a remote frame.


[A station acting as a receiver can initiate the transmission of the respective data by its source by sending a Remote Frame]


____________________________

____________________________


Frames:


  • Data Frame: A frame containing node data for transmission.
  • Remote Frame: A frame requesting the transmission of a specific identifier (certain info.)
  • Error Frame: A Frame transmitted by any node detecting an error.
  • Overload frame: A frame to inject a delay between data and/or remote frame.




ACS - Exam-Example


Assignment 4 (CAN) (appr. 14%)


e) Which error detection checks are carried on the CAN Bus?


     1) On Frames



      2) On Bit level



1) On Frames

  • CRC -  Cycle Redundancy Check: which helps to verify the data being sent.
  • Message Frame Check


2) On Bit Level

  • Monitoring (Transmitters compare the bit levels to be transmitted with the bit levels detected on the bus).
  • Bit Stuffing.
  • Acknowledgment bit, which verifies that a Frame was correctly received.


______________


Others doesn't expect on the answer:

  • Stop of transmission (Error Flag) or Error Frame.
  • Automatic Repeat Request.
  • Switch off of output drivers after consecutive errors been transmitted by the same node.



ACS - Exam-Example

Assignment 5 (Flexray) (appr. 15%)


a) Describe the following term in relation to time synchronization.


1) Offset correction



2) Drift Correction




1) Offset correction

  • Fixed Time difference between two clocks, to be corrected in order to synchronize them.


2) Drift Correction

  • Rate of change of the time difference between two clocks, due to differences in the oscillators and environmental conditions.

ACS - Exam-Example

Assignment 5 (Flexray) (appr. 15%)


c) Describe the characteristics of the Flexray Bus system.

(Requirements resulting of X-by Wire)


  • Capability for redundant communication channels.
  • Deterministic bus access. (max. Latency)
  • Guaranteed transmission with minimum time invariance (Jitter!)
  • Collision free bus access
  • Optional geometric redundancy (via network topology.


___________________________

Further information:  these characteristics comes from -->>

It uses as centralized medium acces control a time slice method, that is TDMA - Time Division Multiple Access.




ACS - Exam-Example

Assignment 6 (MOST) (appr. 16%)


a) Which topology is used in the MOST Bus System?


First of all it's a logical ring.

Normally realized as a physical ring, other topologies required additional components.


It can be enhanced to a double ring, but it's not normal in automotive.

ACS - Exam-Example

Assignment 6 (MOST) (appr. 16%)


c) Which error handling is realized in the synchronous Channel of the MOST bus system ?


Non error handling is used in this area, if the data is not transmitted correctly is lost, and there is no repetition.


___________________________________________

Further information: indirectly related with the answer.


Here is used TDMA, so the data will be transmitted at the same frame position in a specified time pattern.

ACS - Exam-Example

Assignment 8 (TCP/IP) (appr. 12%)


e) Ethernet is not suitable for transmitting safety critical data. Which properties are not fulfilled in Ethernet that are required for the transmission of safety critical data ?


[ Requirements:

+Guaranteed transmission time. (Reliability)

+Less invariance of the transmission time. (No Jitter)

]

Those are no fulfilled in Ethernet cause: 

  • Non deterministic data transfer. After a collision, the node waits a random time interval to sent the packet again.
  • Prone to electromagnetic interference (EMI), corrupted packages.

___________________________________

  • No provision for redundancy.
  • (Non error management on a bit level.)




Melde dich jetzt kostenfrei an um alle Karteikarten und Zusammenfassungen für ACS - Exam-Example an der TU München zu sehen

Singup Image Singup Image
Wave

Andere Kurse aus deinem Studiengang

Für deinen Studiengang ACS - Exam-Example an der TU München gibt es bereits viele Kurse auf StudySmarter, denen du beitreten kannst. Karteikarten, Zusammenfassungen und vieles mehr warten auf dich.

Zurück zur TU München Übersichtsseite

Introduction to Biological Imaging

Neuroprothetics

Energy Markets I

Methoden der Produktentwicklung

Was ist StudySmarter?

Was ist StudySmarter?

StudySmarter ist eine intelligente Lernapp für Studenten. Mit StudySmarter kannst du dir effizient und spielerisch Karteikarten, Zusammenfassungen, Mind-Maps, Lernpläne und mehr erstellen. Erstelle deine eigenen Karteikarten z.B. für ACS - Exam-Example an der TU München oder greife auf tausende Lernmaterialien deiner Kommilitonen zu. Egal, ob an deiner Uni oder an anderen Universitäten. Hunderttausende Studierende bereiten sich mit StudySmarter effizient auf ihre Klausuren vor. Erhältlich auf Web, Android & iOS. Komplett kostenfrei. Keine Haken.

Awards

Bestes EdTech Startup in Deutschland

Awards
Awards

European Youth Award in Smart Learning

Awards
Awards

Bestes EdTech Startup in Europa

Awards
Awards

Bestes EdTech Startup in Deutschland

Awards
Awards

European Youth Award in Smart Learning

Awards
Awards

Bestes EdTech Startup in Europa

Awards